|
|
|
National Stock Number:
3020-00-244-9320
Federal Supply Class:
3020
National Item Identification Number:
002449320
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 680844-1 | 66672 | GUPTILL GEAR CORP | | 680918-1 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 680918-1 | 66672 | GUPTILL GEAR CORP |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.120 INCHES BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.140 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.107 INCHES | | HUB STYLE DESIGNATOR | PLAIN SECOND END | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB NOMINAL DIAMETER | 0.141 INCHES FIRST END | | HUB NOMINAL DIAMETER | 0.250 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.064 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.140 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 1.0625 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | PITCH DIAMETER | 1.0407 INCHES MINIMUM AND 1.0417 INCHES MAXIMUM | | PRECISION CLASSIFICATION | QUALITY NUMBER 10 | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUBS | | SURFACE TREATMENT | ANODIZE OVERALL | | TEETH QUANTITY | 100 | | TOOTH FORM | STANDARD |
|
|