| BODY STYLE | WEBBED, OFFSET, SOLID |
| BORE NOMINAL DIAMETER | 0.280 INCHES COUNTER BORE SECOND END |
| BORE STYLE | W/COUNTERBORE COUNTERBORE FIRST END |
| COUNTERBORE NOMINAL DIAMETER | 0.690 INCHES COUNTERBORE FIRST END |
| COUNTERBORE NOMINAL DEPTH | 1.360 INCHES COUNTERBORE FIRST END |
| FACE NOMINAL WIDTH | 0.440 INCHES |
| HARDNESS RATING | 60.0 ROCKWELL C MINIMUM TEETH |
| HUB SPLINE PITCH DIAMETER | 0.6000 INCHES NOMINAL SECOND END |
| HUB SPLINE QUANTITY | 12 SECOND END |
| HUB STYLE DESIGNATOR | EXTERNALLY SPLINED, INVOLUTE SPLINES SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| PITCH DIAMETER | 1.6000 INCHES NOMINAL |
| PITCH ANGLE | 33.6900 DEGREES |
| MATERIAL | STEEL COMP E9310 OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.781 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 1.770 INCHES |
| NOMINAL OVERALL LENGTH | 3.094 INCHES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 9 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PERIPHERAL FACE, HUBLESS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,5.3.1.2 MIL STD 1ST TREATMENT RESPONSE OR MIL-STD-171,5.3.2.2 MIL STD 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL |
| TEETH QUANTITY | 16 |
| TEETH TYPE | STRAIGHT |