|
|
|
National Stock Number:
3020-00-294-7551
Federal Supply Class:
3020
National Item Identification Number:
002947551
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 5608B | 04537 | ATWOOD & MORRILL CO. INC. DBA WEIR VALVES AND CONTROLS USA |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | TEETH QUANTITY | 40 | | TEETH TYPE | STRAIGHT | | PRESSURE ANGLE | 14.5000 DEGREES | | PITCH ANGLE | 63.4332 DEGREES | | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING | | PITCH DIAMETER | 4.0000 INCHES NOMINAL | | NOMINAL OVERALL LENGTH | 1.8940 INCHES | | NOMINAL OUTSIDE DIAMETER | 4.0865 INCHES | | FACE NOMINAL WIDTH | 0.7500 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.1875 INCHES SECOND END | | BORE STYLE | W/ KEYWAY BOTH ENDS | | BORE NOMINAL DIAMETER | 0.8748 INCHES BOTH ENDS | | KEYWAY NOMINAL WIDTH | 0.1880 INCHES BOTH ENDS | | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.5320 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | 1 STEP SECOND END | | END NOMINAL LENGTH | 0.7475 INCHES SECOND END | | END NOMINAL DIAMETER | 2.2445 INCHES SECOND END | | FIRST STEP NOMINAL LENGTH | 0.4350 INCHES SECOND END | | FIRST STEP NOMINAL DIAMETER | 3.0125 INCHES SECOND END | | BODY STYLE | PLAIN, SOLID | | SPECIAL FEATURES | ENDS OF KEYWAY MILLED FOR SPECIAL DOUBLE HEADED GIB KEY; HUB END IS GROOVED 0.062 IN. W BY 2.188 IN. DIA 0.688 IN. FM END OF HUB |
|
|