| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.270 INCHES BOTH ENDS |
| BORE STYLE | W/COUNTERBORE BOTH ENDS |
| COUNTERBORE NOMINAL DEPTH | 0.590 INCHES BOTH ENDS |
| COUNTERBORE NOMINAL DIAMETER | 0.500 INCHES BOTH ENDS |
| END NOMINAL DIAMETER | 0.952 INCHES FIRST END |
| END NOMINAL LENGTH | 1.200 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.360 INCHES |
| FIRST STEP NOMINAL DIAMETER | 1.095 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 1.110 INCHES FIRST END |
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| HUB STYLE DESIGNATOR | 2 STEPS FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| HUB NOMINAL DIAMETER | 0.934 INCHES SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP E9310 OVERALL |
| MOUNTING HOLE NOMINAL DIAMETER | 0.125 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 3 PLAIN TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.040 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 4.730 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.975 INCHES |
| NOMINAL OVERALL LENGTH | 8.2200 INCHES |
| PITCH DIAMETER | 1.7720 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SECOND STEP NOMINAL DIAMETER | 1.101 INCHES FIRST END |
| SECOND STEP NOMINAL LENGTH | 2.420 INCHES FIRST END |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 22 |
| TOOTH FORM | STANDARD |