| STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB |
| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, OFFSET, SOLID |
| BORE STYLE | W/ KEYWAY BOTH ENDS |
| BORE NOMINAL DIAMETER | 1.3753 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 1.375 INCHES |
| HELIX ANGLE | 34.6284 DEGREES |
| KEYWAY NOMINAL WIDTH | 0.252 INCHES BOTH ENDS |
| HUB NOMINAL DIAMETER | 2.244 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PINNED SECOND END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| III MATERIAL | IRON CAST OVERALL |
| TEETH QUANTITY | 72 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH DIRECTION | RIGHT |
| TOOTH FORM | STANDARD |
| PITCH DIAMETER | 8.7500 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE NOMINAL DIAMETER | 0.188 INCHES AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.375 INCHES AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AXIALLY THROUGH HUB, FIRST END AND 1 PLAIN AXIALLY THROUGH HUB, FIRST END AND 4 PLAIN AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 AXIALLY THROUGH BODY, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.125 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.125 INCHES SECOND END |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.8094 INCHES BOTH ENDS |
| NOMINAL OUTSIDE DIAMETER | 8.944 INCHES |