| DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION | 1.469 INCHES NOMINAL AA END AND 0.938 INCHES NOMINAL BB END |
| DRILLED HOLE DIAMETER | 0.406 INCHES NOMINAL |
| BEARINGS | NOT INCLUDED |
| BORE DIAMETER | 1.7495 INCHES MINIMUM AND 1.7505 INCHES MAXIMUM |
| BORE LENGTH | 2.625 INCHES NOMINAL |
| BORE FEATURE | INCLUDED |
| BORE TYPE | STRAIGHT |
| COUNTERBORE DIAMETER | 2.125 INCHES MINIMUM AND 2.375 INCHES MAXIMUM |
| COUNTERBORE FEATURE | INCLUDED |
| COUNTERBORE LOCATION | BB END |
| COUNTERBORE DEPTH | 0.500 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| DESIGN FORM | WEBBED |
| DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY | 0.997 INCHES MINIMUM AND 1.002 INCHES MAXIMUM |
| FACE WIDTH | 2.094 INCHES NOMINAL |
| FIRST STEP FACE LARGEST DIAMETER AND LOCATION | 2.599 INCHES MINIMUM AA END AND 2.619 INCHES MAXIMUM AA END |
| FIRST STEP LENGTH AND LOCATION | 1.438 INCHES NOMINAL AA END |
| GROOVE DEPTH | 0.422 INCHES NOMINAL |
| GROOVE QUANTITY | 4 |
| GROOVE SHAPE | V |
| GROOVE WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| HOLE LOCATION | LOCATED ON FACE OF HUB |
| HUB END OUTSIDE DIAMETER AND LOCATION | 2.375 INCHES NOMINAL AA END AND 2.746 INCHES MINIMUM BB END AND 2.748 INCHES MAXIMUM BB END |
| INTEGRAL COOLING VANE | NOT INCLUDED |
| KEY WIDTH | 0.251 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| KEYING FACILITY | INCLUDED |
| KEYING FACILITY TYPE | KEYWAY |
| LIGHTENING HOLE | NOT INCLUDED |
| OUTSIDE DIAMETER | 7.125 INCHES NOMINAL |
| OVERALL LENGTH | 3.563 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-I-652, CLASS 30 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | IRON CAST UNS F12101 OVERALL |
| PITCH DIAMETER | 6.703 INCHES NOMINAL |
| PROTRUDING HUB CHARACTERISTIC | STEPPED |
| QUANTITY | 1 |
| SECURING HOLE QUANTITY | 4 |
| SECURING LOCATION | AA END |
| SECURING METHOD | DRILLED HOLE |
| SPECIAL FEATURES | W/TWO DOWEL PINS 3/8 IN. DIA BY 1-1/2 IN. LONG PRESSED INTO 0.3699 IN. MIN,0.3709 IN. MAX DIA HOLES |
| SPLIT HUB FEATURE | NOT INCLUDED |
| STYLE DESIGNATOR | WEBBED OR SPOKED |
| WEB/SPOKE RELATIONSHIP TO FACE CENTERLINE | OFFSET |
| SURFACE TREATMENT | PHOSPHATE |
| V GROOVE ANGLE IN DEG | 36.0 |