|
|
|
National Stock Number:
3020-00-356-1319
Federal Supply Class:
3020
National Item Identification Number:
003561319
Description:
GEAR,HELICAL
Detail:
A GEAR, CYLINDRICAL IN FORM, WITH TEETH ON THE OUTER SURFACE AT AN ANGLE TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, HELICAL:
|
Manufacturer Information:
| 61703 | 08645 | BRIGGS AND STRATTON CORP | | 61703 | 0UPS6 | THOMAS INDUSTRIES INC PNEUMOTIVE DIV | | PLP-61703 | 08645 | BRIGGS AND STRATTON CORP | | 7343115 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 61703 | 51034 | FL INDUSTRIES INC PNEUMOTIVE DIV |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE NOMINAL DIAMETER | 0.3755 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | END NOMINAL DIAMETER | 0.6875 INCHES FIRST END | | END NOMINAL LENGTH | 0.3437 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.406 INCHES | | FIRST STEP NOMINAL DIAMETER | 0.630 INCHES FIRST END | | FIRST STEP NOMINAL LENGTH | 0.750 INCHES FIRST END | | HELIX ANGLE | 30.0000 DEGREES | | HUB NOMINAL DIAMETER | 0.750 INCHES SECOND END | | HUB STYLE DESIGNATOR | 1 STEP FIRST END | | HUB STYLE DESIGNATOR | PLAIN SECOND END | | MATERIAL | IRON CAST OVERALL | | PITCH DIAMETER | 2.6595 INCHES NOMINAL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.008 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.4687 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.7875 INCHES | | PRESSURE ANGLE | 15.7165 DEGREES | | SECOND STEP NOMINAL DIAMETER | 0.6875 INCHES FIRST END | | SECOND STEP NOMINAL LENGTH | 0.375 INCHES FIRST END | | SPECIAL FEATURES | OAM TYPE HUB W/TWO LOBES LOCATED 0.3437 IN.AND 1.5937 IN.FROM 1ST HUB END | | STYLE DESIGNATOR | PROTRUDING HUBS | | TEETH QUANTITY | 36 | | TEETH TYPE | SINGLE HELIX | | THIRD STEP NOMINAL LENGTH | 0.0625 INCHES FIRST END | | THIRD STEP NOMINAL DIAMETER | 2.000 INCHES FIRST END | | TOOTH FORM | STANDARD | | TOOTH DIRECTION | LEFT |
|
|