| ATTACHMENT METHOD | CLAMP |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| CLAMPING SURFACE NOMINAL LENGTH | 0.172 INCHES FIRST END |
| FURNISHED ITEMS AND QUANTITY | 1 RETAINING RING AND 1 STOP PIN |
| FACE NOMINAL WIDTH | 0.104 INCHES |
| FIRST GROOVE NOMINAL DIAMETER | 0.290 INCHES SECOND END |
| FIRST GROOVE NOMINAL WIDTH | 0.029 INCHES SECOND END |
| HUB NOMINAL DIAMETER | 0.183 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.312 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 GROOVE SECOND END |
| HUB STYLE DESIGNATOR | SPLIT FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.050 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.203 INCHES FIRST END |
| NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.021 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 0.771 INCHES |
| PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO. 5.4.1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 72 |
| TOOTH FORM | STANDARD |