|
|
|
National Stock Number:
3020-00-379-2252
Federal Supply Class:
3020
National Item Identification Number:
003792252
Description:
GEAR,HELICAL
Detail:
A GEAR, CYLINDRICAL IN FORM, WITH TEETH ON THE OUTER SURFACE AT AN ANGLE TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, HELICAL:
|
Manufacturer Information:
| 3274588 | 55380 | HATCH & KIRK, INC. | | 3274588 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV | | K-3274588 | 18954 | KORODY-COLYER CORP A CR INDUSTRIES CO |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1035 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE AND | | AISI/SAE 1035 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 89.0 ROCKWELL C MINIMUM AND | | 97.0 ROCKWELL C MAXIMUM OVERALL | | TEETH QUANTITY | 35 | | TEETH TYPE | SINGLE HELIX | | TOOTH FORM | STANDARD | | TOOTH DIRECTION | RIGHT | | PRESSURE ANGLE | 14.5000 DEGREES | | HELIX ANGLE | 45.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUBS | | PITCH DIAMETER | 8.2496 INCHES NOMINAL | | NOMINAL OUTSIDE DIAMETER | 8.581 INCHES | | FACE NOMINAL WIDTH | 2.750 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.500 INCHES FIRST END | | 1.250 INCHES SECOND END | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 2.001 INCHES BOTH ENDS | | SPLINE QUANTITY | 48 BOTH ENDS | | SPLINE PITCH DIAMETER | 1.9505 INCHES NOMINAL BOTH ENDS | | HUB STYLE DESIGNATOR | 1 STEP BOTH ENDS | | END NOMINAL LENGTH | 2.007 INCHES FIRST END | | 2.000 INCHES SECOND END | | END NOMINAL DIAMETER | 3.249 INCHES FIRST END | | 3.249 INCHES SECOND END | | FIRST STEP NOMINAL DIAMETER | 4.750 INCHES FIRST END | | 4.750 INCHES SECOND END | | BODY STYLE | WEBBED, OFFSET, SOLID | | SPECIAL FEATURES | 2 PLUGS; COUNTERBORE ON BOTH ENDS W/ 2.125 IN. NOM. DIA,1.375 IN. NOM. DEPTH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 55380 | | DESIGN CONTROL REFERENCE | 3274588 |
|
|