|
|
|
National Stock Number:
3020-00-385-7729
Federal Supply Class:
3020
National Item Identification Number:
003857729
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 7186992 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | TEETH QUANTITY | 48 | | TEETH TYPE | STRAIGHT | | PRESSURE ANGLE | 14.5000 DEGREES | | PITCH ANGLE | 45.0000 DEGREES | | BACKLASH DESIGNATION | GRADE A | | STYLE DESIGNATOR | SIDE FACE, FRONT HUB PROTRUDING, BACK HUB RECESSED | | PITCH DIAMETER | 8.0000 INCHES NOMINAL | | NOMINAL OVERALL LENGTH | 1.688 INCHES | | NOMINAL OUTSIDE DIAMETER | 8.2356 INCHES | | FACE NOMINAL WIDTH | 1.500 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.166 INCHES FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.0630 INCHES SECOND END | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 1.914 INCHES BOTH ENDS | | SPLINE QUANTITY | 29 BOTH ENDS | | SPLINE PITCH DIAMETER | 1.8125 INCHES NOMINAL BOTH ENDS | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | HUB NOMINAL DIAMETER | 3.000 INCHES BOTH ENDS | | BODY STYLE | WEBBED, OFFSET, SOLID |
|
|