|
|
|
National Stock Number:
3020-00-385-7787
Federal Supply Class:
3020
National Item Identification Number:
003857787
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 7188338 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| BACKLASH DESIGNATION | GRADE B | | BODY STYLE | WEBBED, OFFSET, SOLID | | BORE NOMINAL DIAMETER | 1.690 INCHES BOTH ENDS | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | FACE NOMINAL WIDTH | 1.500 INCHES | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | HUB NOMINAL DIAMETER | 2.250 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | MATERIAL | STEEL OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.969 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.270 INCHES FIRST END | | NOMINAL OVERALL LENGTH | 2.489 INCHES | | NOMINAL OUTSIDE DIAMETER | 8.1485 INCHES | | PITCH ANGLE | 63.4332 DEGREES | | PITCH DIAMETER | 8.0000 INCHES NOMINAL | | PRESSURE ANGLE | 14.5000 DEGREES | | SPECIAL FEATURES | NO.4 10.112/-48NF-3B THD,0.3125 IN. LG LONGITUDINALLY IN FIRST HUB END,6 NO.8 10.1641-32NC-2B THD EQUALLY SPACED ON 1.8125 IN.BOLT CIRCLE,0.375 IN. DEEP | | SPLINE PITCH DIAMETER | 1.6250 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 26 BOTH ENDS | | STYLE DESIGNATOR | SIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING | | SURFACE TREATMENT | PHOSPHATE OVERALL | | TEETH QUANTITY | 48 | | TEETH TYPE | STRAIGHT |
|
|