|
|
|
National Stock Number:
3020-00-391-0929
Federal Supply Class:
3020
National Item Identification Number:
003910929
Description:
GEAR,HELICAL
Detail:
A GEAR, CYLINDRICAL IN FORM, WITH TEETH ON THE OUTER SURFACE AT AN ANGLE TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, HELICAL:
|
Manufacturer Information:
| 3300003 | 55380 | HATCH & KIRK, INC. | | 3300003 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV |
|
Techincal Specification:
| BODY STYLE | WEBBED, WITH LIGHTENING HOLES | | BORE NOMINAL DIAMETER | 2.0000 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | FACE NOMINAL WIDTH | 2.000 INCHES | | HARDNESS RATING | 10.0 ROCKWELL C MINIMUM AND 20.0 ROCKWELL C MAXIMUM OVERALL | | HELIX ANGLE | 27.3217 DEGREES | | HUB NOMINAL DIAMETER | 2.997 INCHES FIRST END | | HUB NOMINAL DIAMETER | 2.997 INCHES SECOND END | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.688 INCHES BOTH ENDS | | NOMINAL OUTSIDE DIAMETER | 11.084 INCHES | | PITCH DIAMETER | 10.8000 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPECIAL FEATURES | TWO COUNTERWEIGHTS AND RIVETS,ONE PLUG,OIL HOLES IN HUB,FIG 6 STAMPED ON SIDE OF GEAR FACE ON CENTER LINE OF TOOTH SPACE 9 DEG 3 MIN TO RIGHT OF LOWER VERTICAL CENTER LINE,FIG 5 STAMPED ON SIDE OF GEAR FACE ON CENTER LINE OF TOOTH SPACE 75 DEG 20 MIN CW FROM FIG 6 | | STYLE DESIGNATOR | PROTRUDING HUBS | | TEETH QUANTITY | 54 | | TEETH TYPE | SINGLE HELIX | | TOOTH FORM | STANDARD | | TOOTH DIRECTION | LEFT |
|
|