| DESIGN FORM | PLAIN |
| TEETH ROW QUANTITY | 1 |
| TEETH QUANTITY PER ROW | 7 |
| TOOTH PITCH | 3.000 INCHES NOMINAL |
| MATERIAL | STEEL COMP 1045 |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD NO. 66,AISI FED STD SINGLE MATERIAL RESPONSE OR |
| SAE 1045 ASSN STD SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | PLAIN |
| OUTSIDE DIAMETER | 15.000 INCHES NOMINAL |
| OVERALL LENGTH | 6.000 INCHES NOMINAL |
| PITCH DIAMETER | 13.830 INCHES NOMINAL |
| FACE WIDTH | 1.250 INCHES NOMINAL |
| HARDNESS RATING TEST METHOD | NOT RATED |
| BORE TYPE | STRAIGHT |
| BORE DIAMETER | 2.689 INCHES MINIMUM AND |
| 2.691 INCHES MAXIMUM |
| BORE LENGTH | 6.000 INCHES NOMINAL |
| KEYING FACILITY TYPE | TAPERED KEYWAY |
| QUANTITY | 1 |
| KEYWAY WIDTH | 0.625 INCHES NOMINAL |
| DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY | 1.660 INCHES NOMINAL AND |
| 1.596 INCHES NOMINAL |
| PROTRUDING HUB CHARACTERISTIC | PLAIN |
| HUB OUTSIDE DIAMETER | 5.500 INCHES NOMINAL BOTH ENDS |
| FURNISHED ITEMS | KEYING FACILITY |
| DISTANCE FROM HUB END TO FLANGE END | 3.000 INCHES NOMINAL AA END |
| 1.750 INCHES NOMINAL BB END |
| SECURING METHOD | THREADED HOLE |
| SECURING LOCATION | AA END |
| SECURING HOLE QUANTITY | 1 |
| THREAD SIZE | 3/4 IN.-10 |
| HOLE LOCATION | LOCATED ON BOTTOM OF KEYWAY 1.500 IN. FROM HUB END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 77237 |
| DESIGN CONTROL REFERENCE | WKF002052000 |