|
|
|
National Stock Number:
3020-00-460-8038
Federal Supply Class:
3020
National Item Identification Number:
004608038
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 209-040-149 | 97499 | BELL TEXTRON INC | | 209-040-149-001 | 97499 | BELL TEXTRON INC | | 209-040-149-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BODY RECESS NOMINAL DEPTH | 0.408 INCHES FIRST END | | BODY STYLE | WEBBED, OFFSET, SOLID | | BORE NOMINAL DEPTH | 3.165 INCHES FIRST END | | BORE NOMINAL DIAMETER | 0.664 INCHES SECOND END | | BORE NOMINAL DIAMETER | 1.000 INCHES FIRST END | | BORE STYLE | PARTIAL W/COUNTERBORE FIRST END | | BORE STYLE | INVOLUTE SPLINE SECOND END | | COUNTERBORE NOMINAL DIAMETER | 1.370 INCHES FIRST END | | COUNTERBORE NOMINAL DEPTH | 1.110 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.234 INCHES | | HARDNESS RATING | 90.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 91.5 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL | | HUB SPLINE PITCH DIAMETER | 1.2000 INCHES NOMINAL SECOND END | | HUB SPLINE QUANTITY | 24 SECOND END | | HUB STYLE DESIGNATOR | EXTERNALLY SPLINED, INVOLUTE SPLINES SECOND END | | PITCH DIAMETER | 3.7637 INCHES NOMINAL | | PITCH ANGLE | 46.2667 DEGREES | | MATERIAL | STEEL OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 4.690 INCHES SECOND END | | NOMINAL OUTSIDE DIAMETER | 3.932 INCHES | | NOMINAL OVERALL LENGTH | 5.333 INCHES | | PRESSURE ANGLE | 22.5000 DEGREES | | SPLINE PITCH DIAMETER | 0.6000 INCHES NOMINAL SECOND END | | SPLINE QUANTITY | 12 SECOND END | | STYLE DESIGNATOR | SIDE FACE, BACK HUB PROTRUDING | | TEETH QUANTITY | 23 | | TEETH TYPE | SPIRAL | | TOOTH DIRECTION | RIGHT |
|
|