| BODY RECESS NOMINAL DEPTH | 0.075 INCHES FIRST END0.075 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLIDPLAIN, SOLID |
| BORE NOMINAL DEPTH | 0.301 INCHES BOTH ENDS0.301 INCHES BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.313 INCHES BOTH ENDS0.313 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDSPLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.187 INCHES0.187 INCHES |
| HUB NOMINAL DIAMETER | 0.624 INCHES SECOND END0.624 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PINNED SECOND ENDPINNED SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633,COMP 1045,COND CF FED SPEC SINGLE MATERIAL RESPONSE OVERALLQQ-S-633,COMP 1045,COND CF FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| PITCH DIAMETER | 1.4980 INCHES MINIMUM AND 1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM1.5000 INCHES MAXIMUM |
| MATERIAL | STEEL OVERALLSTEEL OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.255 INCHES SECOND END0.255 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 1.504 INCHES1.504 INCHES |
| NOMINAL OVERALL LENGTH | 0.366 INCHES0.366 INCHES |
| PRECISION CLASSIFICATION | QUALITY NUMBER 9QUALITY NUMBER 9 |
| PRESSURE ANGLE | 20.0000 DEGREES AND 20.0000 DEGREES AND 71.5667 DEGREES71.5667 DEGREES |
| SPECIAL FEATURES | DISTANCE FROM SECOND END OF HUB TO CENTER OF TAPPED HOLE 0.124 NOM. IN.DISTANCE FROM SECOND END OF HUB TO CENTER OF TAPPED HOLE 0.124 NOM. IN. |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDINGPERIPHERAL FACE, BACK HUB PROTRUDING |
| SURFACE TREATMENT | OXIDE OVERALLOXIDE OVERALL |
| TEETH QUANTITY | 7272 |
| TEETH TYPE | STRAIGHTSTRAIGHT |