|
|
|
National Stock Number:
3020-00-517-0618
Federal Supply Class:
3020
National Item Identification Number:
005170618
Description:
GEAR,HELICAL
Detail:
A GEAR, CYLINDRICAL IN FORM, WITH TEETH ON THE OUTER SURFACE AT AN ANGLE TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, HELICAL:
|
Manufacturer Information:
| 2273 | 79575 | WICO-PRESTOLITE CO THE DIV OF ELTRA CORP | | 4221 | 0ATF2 | L & L BOILER MAINTENANCE INC | | 609028 | 0EXU3 | AQUA-CHEM, INC. | | 609028 | 12793 | AQUA-CHEM INC CLEAVER-BROOKS DIV | | 4221 | 54108 | D & J PARTS INC | | D142 | 7PZX0 | FAIRBANKS MORSE, LLC | | GD87B | 66289 | WISCONSIN MOTORS LLC | | WPP194 | 79172 | SIEMENS WATER TECHNOLOGIES CORP. DIV WALLACE & TIERNAN PRODUCTS | | WPP57 | 79172 | SIEMENS WATER TECHNOLOGIES CORP. DIV WALLACE & TIERNAN PRODUCTS | | GD87B | 7PZX0 | FAIRBANKS MORSE, LLC | | GD87B | 82796 | COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE | | D142 | 82796 | COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1213 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI C1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | TEETH QUANTITY | 22 | | TEETH TYPE | SINGLE HELIX | | TOOTH FORM | STANDARD | | TOOTH DIRECTION | RIGHT | | PRESSURE ANGLE | 14.5000 DEGREES | | HELIX ANGLE | 27.2667 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | PITCH DIAMETER | 2.0585 INCHES NOMINAL | | NOMINAL OUTSIDE DIAMETER | 2.223 INCHES | | FACE NOMINAL WIDTH | 0.375 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.176 INCHES FIRST END | | BORE STYLE | W/COUNTERBORE COUNTER BORE, SECOND END | | BORE NOMINAL DIAMETER | 0.625 INCHES COUNTER BORE, SECOND END | | COUNTERBORE NOMINAL DEPTH | 0.052 INCHES COUNTER BORE, SECOND END | | COUNTERBORE NOMINAL DIAMETER | 1.250 INCHES COUNTER BORE, SECOND END | | HUB STYLE DESIGNATOR | 1 STEP FIRST END | | END NOMINAL LENGTH | 0.031 INCHES FIRST END | | END NOMINAL DIAMETER | 1.000 INCHES FIRST END | | FIRST STEP NOMINAL LENGTH | 0.145 INCHES FIRST END | | FIRST STEP NOMINAL DIAMETER | 1.688 INCHES FIRST END | | BODY STYLE | PLAIN, SOLID | | SPECIAL FEATURES | LETTER I STAMPED ON 1ST END 2 DEG FROM GROOVE CENTER LINE CW,GROOVE 0.250 IN. MIN 0.253 IN. MAX W,0.171 IN. MIN 0.181 IN. MAX DEEP ON FACE OF HUB |
|
|