| END NOMINAL DIAMETER | 0.590 INCHES BOTH ENDS |
| END NOMINAL LENGTH | 0.438 INCHES FIRST END |
| END NOMINAL LENGTH | 0.500 INCHES SECOND END |
| FACE NOMINAL WIDTH | 1.750 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.906 INCHES SECOND END |
| FIRST STEP NOMINAL DIAMETER | 0.876 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.438 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.844 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| HUB STYLE DESIGNATOR | 2 STEPS FIRST END |
| MATERIAL | STEEL OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.938 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.938 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.375 INCHES |
| NOMINAL OVERALL LENGTH | 4.625 INCHES |
| PITCH DIAMETER | 1.1930 INCHES NOMINAL |
| PRESSURE ANGLE | 29.0000 DEGREES |
| SECOND STEP NOMINAL DIAMETER | 0.906 INCHES FIRST END |
| SECOND STEP NOMINAL LENGTH | 0.656 INCHES SECOND END |
| SPECIAL FEATURES | BOTH HUBS HAVE 0.062 IN. W GROVES LOCATED 0.375 IN. FROM HUB ENDS,FIRST HUB A LS0 HAS EXTERNAL KEYWAY |
| STYLE DESIGNATOR | SIDE FACE, FRONT HUB FLUSH, BACK HUB PROTRUDING |
| THREAD FORM DIRECTION | LEFT-HAND |
| THREAD FORM QUANTITY | 1 |