|
|
|
National Stock Number:
3020-00-588-6702
Federal Supply Class:
3020
National Item Identification Number:
005886702
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| ABC61-200 | 23266 | SECS, INC. | | P12-7-200C | 00141 | ROLLER BEARING CO OF AMERICA, INC | | Z3H200A | 00328 | DESIGNATRONICS INCORPORATED |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS | | FACE NOMINAL WIDTH | 0.104 INCHES | | HUB NOMINAL DIAMETER | 0.188 INCHES FIRST END | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.103 INCHES | | NOMINAL OVERALL LENGTH | 0.325 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE HUB | | MATERIAL | ALUMINUM ALLOY 2024 BODY | | MATERIAL | STEEL COMP 303 HUB | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.221 INCHES FIRST END | | PITCH DIAMETER | 2.0823 INCHES MINIMUM AND 2.0833 INCHES MAXIMUM | | PRESSURE ANGLE | 20.0000 DEGREES | | TOOTH FORM | STANDARD | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT | ANODIZE BODY | | SURFACE TREATMENT | PASSIVATE HUB | | TEETH QUANTITY | 200 |
|
|