| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, WITH LIGHTENING HOLES |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 0.224 INCHES AXIALLY THROUGH HUB, FIRST END |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.062 INCHES |
| HUB NOMINAL DIAMETER | 0.630 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 48 AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.099 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.224 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.499 INCHES |
| NOMINAL OVERALL LENGTH | 0.286 INCHES |
| PITCH DIAMETER | 1.4687 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 94 |
| TOOTH FORM | STANDARD |