| DISTANCE FROM HUB END TO FLANGE END | 1.416 INCHES NOMINAL BOTH ENDS |
| DRILLED HOLE DIAMETER | 0.252 INCHES NOMINAL |
| BORE TYPE | STRAIGHT SPLINE |
| DESIGN FORM | PLAIN |
| FACE WIDTH | 0.459 INCHES NOMINAL |
| HARDNESS RATING TEST METHOD | NOT RATED |
| HOLE LOCATION | ON HUB,0.625 IN. FROM END THRU CENTER OF SPLINE |
| HUB OUTSIDE DIAMETER | 3.500 INCHES NOMINAL BOTH ENDS |
| OUTSIDE DIAMETER | 16.433 INCHES NOMINAL |
| OVERALL LENGTH | 1.875 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-16113, TYPE 1, GRADE M MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL UNS K11801 |
| PITCH DIAMETER | 16.001 INCHES NOMINAL |
| PROTRUDING HUB CHARACTERISTIC | PLAIN |
| SECURING HOLE QUANTITY | 2 |
| SECURING METHOD | DRILLED HOLE |
| SPLINE LENGTH | 1.875 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 2.247 INCHES MINIMUM AND 2.249 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 2.032 INCHES MINIMUM AND 2.034 INCHES MAXIMUM |
| SPLINE QUANTITY | 6 |
| STYLE DESIGNATOR | PLAIN |
| TEETH QUANTITY PER ROW | 67 |
| TEETH ROW QUANTITY | 1 |
| TOOTH PITCH | 0.750 INCHES NOMINAL |