| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 10001 |
| DESIGN CONTROL REFERENCE | 271653PC4 |
| MATERIAL | STEEL COMP 4615 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | TED STD 66 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HARDNESS RATING | 54.0 ROCKWELL C MINIMUM AND |
| 59.0 ROCKWELL C MAXIMUM OVERALL |
| TEETH QUANTITY | 40 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 14.5000 DEGREES |
| STYLE DESIGNATOR | HUBLESS |
| PITCH DIAMETER | 5.0000 INCHES NOMINAL |
| NOMINAL OUTSIDE DIAMETER | 5.250 INCHES |
| FACE NOMINAL WIDTH | 0.750 INCHES |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 2.000 INCHES BOTH ENDS |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 3 COUNTERBORED AND |
| 3 PLAIN AND |
| 3 THREADED AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.406 INCHES AND |
| 0.438 INCHES AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.375 INCHES AXIALLY THROUGH BODY, SECOND END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 AXIALLY THROUGH BODY, SECOND END |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 2.875 INCHES AXIALLY THROUGH BODY, SECOND END |