| ATTACHMENT METHOD | MOUNTING HOLE |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 4.875 INCHES AXIALLY THROUGH BODY, FIRST END |
| BORE STYLE | W/COUNTERBORE BOTH ENDS |
| FACE NOMINAL WIDTH | 0.250 INCHES |
| FIRST GROOVE NOMINAL WIDTH | 0.062 INCHES FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 6 THREADED AXIALLY THROUGH BODY, FIRST END |
| NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.120 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.500 INCHES FIRST END |
| NOMINAL OVERALL LENGTH | 0.750 INCHES |
| PITCH DIAMETER | 5.9380 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 285 |