| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 0.719 INCHES AXIALLY THROUGH BODY, FIRST END |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.188 INCHES |
| FLANGE NOMINAL DIAMETER | 1.000 INCHES |
| FLANGE NOMINAL THICKNESS | 0.078 INCHES |
| HUB NOMINAL DIAMETER | 0.344 INCHES BETWEEN BODY AND FLANGE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 416,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 416 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.125 INCHES AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 44 AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH BODY, FIRST END |
| NOMINAL DISTANCE BETWEEN OUTER BODY FACE AND INNER FLANGE FACE | 0.474 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.519 INCHES |
| PITCH DIAMETER | 0.4770 INCHES MINIMUM AND 0.4790 INCHES MAXIMUM |
| PRESSURE ANGLE | 14.5000 DEGREES |
| STYLE DESIGNATOR | FLANGED END |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 23 |
| TOOTH FORM | STANDARD |