| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BODY RECESS NOMINAL DEPTH | 0.1100 INCHES FIRST END |
| BORE NOMINAL DEPTH | 1.125 INCHES BOTH ENDS |
| BORE NOMINAL DIAMETER | 1.500 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.375 INCHES |
| HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM TEETH |
| HUB STYLE DESIGNATOR | PINNED SECOND END |
| HUB NOMINAL DIAMETER | 2.125 INCHES SECOND END |
| MATERIAL | STEEL OVERALL |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.811 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 2.461 INCHES |
| NOMINAL OVERALL LENGTH | 1.235 INCHES |
| PITCH DIAMETER | 2.3750 INCHES NOMINAL |
| PRESSURE ANGLE | 14.5000 DEGREES AND 45.0000 DEGREES |
| SPECIAL FEATURES | DISTANCE FROM SECOND END OF HUB TO CENTER OF TAPPED HOLE 0.250 NOM. IN. |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | OXIDE OVERALL |
| TEETH QUANTITY | 38 |
| TEETH TYPE | STRAIGHT |