| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.094 INCHES BOTH ENDS |
| BORE STYLE | W/COUNTERBORE BOTH ENDS |
| COUNTERBORE NOMINAL DIAMETER | 0.344 INCHES SECOND END |
| COUNTERBORE NOMINAL DEPTH | 0.047 INCHES SECOND END |
| END NOMINAL DIAMETER | 0.313 INCHES FIRST END |
| END NOMINAL LENGTH | 0.172 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.062 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.563 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.031 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.395 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL | PLASTIC BODY |
| MATERIAL | PLASTIC TEETH |
| PITCH DIAMETER | 0.6250 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING HUB |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.016 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.203 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.672 INCHES |
| PRESSURE ANGLE | 14.5000 DEGREES |
| SPECIAL FEATURES | MTG HOLES 90 DEGS APART |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 30 |
| TOOTH FORM | STANDARD |