|
|
|
National Stock Number:
3020-00-729-6663
Federal Supply Class:
3020
National Item Identification Number:
007296663
Description:
GEAR,SPUR
Detail:
A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also GEAR, ANTIBACKLASH, SPUR. For bulk material, see ROD, PINION.
|
Manufacturer Information:
| 542703 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| ATTACHMENT METHOD | MOUNTING HOLE | | BODY STYLE | WEBBED, OFFSET, WITH LIGHTENING HOLES | | BORE NOMINAL DIAMETER | 0.292 INCHES BOTH ENDS | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | FACE NOMINAL WIDTH | 0.210 INCHES | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HUB STYLE DESIGNATOR | PLAIN FIRST END | | HUB NOMINAL DIAMETER | 0.495 INCHES FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 416SE OVERALL | | MOUNTING HOLE NOMINAL DIAMETER | 0.098 INCHES TRANSVERSELY THROUGH HUB, FIRST END | | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN TRANSVERSELY THROUGH HUB, FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.240 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.170 INCHES | | NOMINAL OVERALL LENGTH | 0.450 INCHES | | PITCH DIAMETER | 2.1250 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPLINE PITCH DIAMETER | 0.2917 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 14 BOTH ENDS | | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE FLUSH HUB | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEETH QUANTITY | 68 | | TOOTH FORM | STANDARD |
|
|