| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, OFFSET, SOLID |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 1.030 INCHES AXIALLY THROUGH HUB, FIRST END |
| BORE NOMINAL DIAMETER | 0.500 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.093 INCHES |
| FIRST GROOVE NOMINAL DIAMETER | 1.834 INCHES FIRST END |
| FIRST GROOVE NOMINAL WIDTH | 0.032 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| HUB NOMINAL DIAMETER | 1.875 INCHES FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-26075 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | MAGNESIUM OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 48 AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.109 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.031 INCHES SECOND END |
| NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.077 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.041 INCHES |
| NOMINAL OVERALL LENGTH | 0.202 INCHES |
| PITCH DIAMETER | 2.0000 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 96 |
| TOOTH FORM | STANDARD |