|
|
|
National Stock Number:
3020-00-735-1158
Federal Supply Class:
3020
National Item Identification Number:
007351158
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 518531 | 02978 | RENK AMERICA LLC | | 7351158 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE NOMINAL DEPTH | 2.940 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.936 INCHES BOTH ENDS | | COUNTERBORE NOMINAL DEPTH | 0.8500 INCHES FIRST END | | COUNTERBORE NOMINAL DIAMETER | 1.250 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.720 INCHES | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM BODY | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM TEETH | | HUB NOMINAL DIAMETER | 1.500 INCHES FIRST END | | HUB NOMINAL DIAMETER | 2.060 INCHES SECOND END | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048,FS8615,FS8620,FS8720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.060 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 2.081 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 3.9759 INCHES | | NOMINAL OVERALL LENGTH | 0.294 INCHES | | PITCH ANGLE | 55.7841 DEGREES | | PITCH DIAMETER | 3.8462 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PERIPHERAL FACE, PROTRUDING HUBS | | TEETH QUANTITY | 25 | | TEETH TYPE | STRAIGHT |
|
|