| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.1873 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.187 INCHES |
| HARDNESS RATING | 75.0 ROCKWELL C MINIMUM AND 83.0 ROCKWELL C MAXIMUM OVERALL |
| HELIX ANGLE | 45.0000 DEGREES |
| HUB NOMINAL DIAMETER | 0.375 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 COMP 3035 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-7720,COMP 303SE MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 AND STEEL COMP 303SE OVERALL |
| PITCH DIAMETER | 0.4419 INCHES NOMINAL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.219 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.4730 INCHES |
| NOMINAL OVERALL LENGTH | 0.406 INCHES |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 20 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH DIRECTION | RIGHT |
| TOOTH FORM | STANDARD |