|
|
|
National Stock Number:
3020-00-821-3042
Federal Supply Class:
3020
National Item Identification Number:
008213042
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 07-101398 | 16662 | LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE | | 07-101398 | 66654 | TVH PARTS CO. | | 101398 | 12603 | CLARK EQUIPMENT CO | | 101398 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | 101398 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE NOMINAL DIAMETER | 1.648 INCHES BOTH ENDS | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | FACE NOMINAL WIDTH | 1.250 INCHES | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM OVERALL | | HUB NOMINAL DIAMETER | 2.187 INCHES SECOND END | | HUB STYLE DESIGNATOR | PLAIN SECOND END | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE AND AISI/SAE 8620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | PITCH DIAMETER | 4.0000 INCHES NOMINAL | | PITCH ANGLE | 55.5000 DEGREES | | MATERIAL | STEEL COMP 8620H OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.875 INCHES SECOND END | | NOMINAL OVERALL LENGTH | 2.078 INCHES | | NOMINAL OUTSIDE DIAMETER | 4.123 INCHES | | PRESSURE ANGLE | 22.5000 DEGREES | | SPECIAL FEATURES | 0.063 IN.45 DEG CHAMFERED OD OF HUB END,THREE OIL HOLES 0.188 IN.DIA,UNEVENLY SPACED BETWEEN TEETH,0.875 IN.FROM END OF TEETH,TO CENTER OF HOLE | | SPLINE PITCH DIAMETER | 1.5400 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 16 BOTH ENDS | | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING | | TEETH QUANTITY | 16 | | TEETH TYPE | STRAIGHT |
|
|