|
|
|
National Stock Number:
3020-00-823-5081
Federal Supply Class:
3020
National Item Identification Number:
008235081
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| WD5018 | 11708 | CARROLL ENGINEERING CO | | WD5018-15LH | 11708 | CARROLL ENGINEERING CO | | WS9030-15LH | 11708 | CARROLL ENGINEERING CO |
|
Techincal Specification:
| BODY RECESS NOMINAL DEPTH | 0.106 INCHES FIRST END | | BODY STYLE | PLAIN, SOLID | | BORE NOMINAL DIAMETER | 2.502 INCHES BOTH ENDS | | BORE STYLE | W/ KEYWAY BOTH ENDS | | FACE NOMINAL WIDTH | 1.125 INCHES | | HARDNESS RATING | 56.0 ROCKWELL C MINIMUM AND 61.0 ROCKWELL C MAXIMUM OVERALL | | HUB NOMINAL DIAMETER | 3.313 INCHES FIRST END | | HUB NOMINAL DIAMETER | 3.500 INCHES SECOND END | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | KEYWAY NOMINAL WIDTH | 0.500 INCHES BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY N0.4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | PITCH ANGLE | 74.0500 DEGREES | | PITCH DIAMETER | 7.7200 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.308 INCHES BOTH ENDS | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES SECOND END | | NOMINAL OVERALL LENGTH | 1.335 INCHES | | NOMINAL OUTSIDE DIAMETER | 7.769 INCHES | | PRESSURE ANGLE | 20.0000 DEGREES | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY LH | | STYLE DESIGNATOR | PERIPHERAL FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING | | TEETH QUANTITY | 42 | | TEETH TYPE | SPIRAL | | TOOTH DIRECTION | LEFT |
|
|