| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 5.340 INCHES AXIALLY THROUGH BODY, FIRST END |
| BORE NOMINAL DIAMETER | 4.941 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.375 INCHES |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MOUNTING HOLE NOMINAL DIAMETER | 0.095 INCHES AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.164 INCHES AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 COUNTERSUNK AND 6 THREADED AXIALLY THROUGH BODY, FIRST END |
| NOMINAL OUTSIDE DIAMETER | 5.771 INCHES |
| PITCH DIAMETER | 5.7291 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | MOUNTING HOLES SPACED 60 DEG APART AND UNTHD HOLE SPACED 0.372 IN. FROM THD HOLE |
| STYLE DESIGNATOR | HUBLESS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 275 |
| TOOTH FORM | STANDARD |