| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 0.688 INCHES AXIALLY THROUGH BODY, FIRST END |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.126 INCHES |
| FIRST STEP NOMINAL DIAMETER | 1.000 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.062 INCHES FIRST END |
| HUB NOMINAL DIAMETER | 0.250 INCHES SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 304/SAE 30304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 40 AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC AXIALLY THROUGH BODY, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.078 INCHES SECOND END |
| PITCH DIAMETER | 1.2500 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 6 OR QUALITY NUMBER 7 |
| PRESSURE ANGLE | 14.5000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 90 |
| TOOTH FORM | STANDARD |