| MATERIAL | STEEL COMP 416 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 416,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| TEETH QUANTITY | 28 |
| TOOTH FORM | STANDARD |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| PITCH DIAMETER | 0.4375 INCHES NOMINAL |
| NOMINAL OVERALL LENGTH | 0.406 INCHES |
| NOMINAL OUTSIDE DIAMETER | 0.467 INCHES |
| FACE NOMINAL WIDTH | 0.188 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.216 INCHES FIRST END |
| BORE STYLE | W/COUNTERBORE BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| COUNTERBORE NOMINAL DEPTH | 0.188 INCHES COUNTERBORE, FIRST END |
| COUNTERBORE NOMINAL DIAMETER | 0.467 INCHES COUNTERBORE, FIRST END |
| HUB NOMINAL DIAMETER | 0.375 INCHES FIRST END |
| BODY STYLE | PLAIN, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB BETWEEN FIRSTEND FLANGE AND BODY |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 18876 |
| DESIGN CONTROL REFERENCE | 9190914 |