| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BODY RECESS NOMINAL DEPTH | 0.0470 INCHES FIRST END |
| BORE NOMINAL DEPTH | 0.344 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 1.187 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.156 INCHES |
| HUB NOMINAL DIAMETER | 1.437 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 48 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 1.521 INCHES |
| NOMINAL OVERALL LENGTH | 0.344 INCHES |
| PITCH DIAMETER | 1.4980 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES AND 63.4333 DEGREES |
| SPECIAL FEATURES | DISTANCE FROM END OF HUB TO CENTER OF TAPPED HOLE 0.125 NOM IN. |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | OXIDE OVERALL |
| TEETH QUANTITY | 72 |
| TEETH TYPE | STRAIGHT |