|
|
|
National Stock Number:
3020-00-852-5187
Federal Supply Class:
3020
National Item Identification Number:
008525187
Description:
GEAR,HELICAL
Detail:
A GEAR, CYLINDRICAL IN FORM, WITH TEETH ON THE OUTER SURFACE AT AN ANGLE TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, HELICAL:
|
Manufacturer Information:
| 149898 | 04627 | HYSTER-YALE GROUP, INC. | | 149898 | 30076 | HYSTER-YALE GROUP, INC. | | 3882893 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 3882893 | 24617 | GENERAL MOTORS CORP | | T2526 | 77605 | REPUBLIC GEAR CO | | 3882893 | 7X677 | GENERAL MOTORS LLC | | TG2526 | 31033 | TRW INC TRW INTL TRADE GOVERNMENT SALES DEPT |
|
Techincal Specification:
| BODY STYLE | SPOKED, OFFSET | | BORE NOMINAL DIAMETER | 1.278 INCHES BOTH ENDS | | BORE STYLE | W/ KEYWAY BOTH ENDS | | FACE NOMINAL WIDTH | 0.875 INCHES | | HARDNESS RATING | 75.0 BRINELL STANDARD MINIMUM AND 95.0 BRINELL STANDARD MAXIMUM OVERALL | | HELIX ANGLE | 23.9196 DEGREES | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | HUB NOMINAL DIAMETER | 2.563 INCHES SECOND END | | KEYWAY NOMINAL WIDTH | 0.188 INCHES BOTH ENDS | | MATERIAL | ALUMINUM ALLOY OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.078 INCHES FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.098 INCHES SECOND END | | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.741 INCHES BOTH ENDS | | NOMINAL OUTSIDE DIAMETER | 6.015 INCHES | | PITCH DIAMETER | 5.8848 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPECIAL FEATURES | LETTER O STAMPED BETWEEN TEETH ON FACE OF GEAR SIDE 76 DEG 17 MIN CW FROM CENTER LINE OF KEYWAY,TWO PULLER HOLES | | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB | | TEETH QUANTITY | 54 | | TEETH TYPE | SINGLE HELIX | | TOOTH DIRECTION | RIGHT | | TOOTH FORM | STANDARD |
|
|