|
|
|
National Stock Number:
3020-00-858-4621
Federal Supply Class:
3020
National Item Identification Number:
008584621
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| SPL23015 | 86831 | SAFRAN ELECTRONICS & DEFENSE, AVIONICS USA, LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-13924,CLASS 1 GRADE 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM OVERALL | | TEETH QUANTITY | 28 | | TEETH TYPE | STRAIGHT | | TOOTH DIRECTION | RIGHT | | PRESSURE ANGLE | 20.0000 DEGREES | | PITCH ANGLE | 24.0002 DEGREES | | STYLE DESIGNATOR | PERIPHERAL FACE, PROTRUDING HUBS | | PITCH DIAMETER | 0.5833 INCHES NOMINAL | | NOMINAL OVERALL LENGTH | 1.218 INCHES | | NOMINAL OUTSIDE DIAMETER | 1.905 INCHES | | FACE NOMINAL WIDTH | 0.405 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.898 INCHES SECOND END | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 0.5948 INCHES BOTH ENDS | | SPLINE QUANTITY | 14 BOTH ENDS | | SPLINE PITCH DIAMETER | 0.5833 INCHES NOMINAL BOTH ENDS | | HUB STYLE DESIGNATOR | 1 STEP BOTH ENDS | | END NOMINAL LENGTH | 0.280 INCHES FIRST END | | 0.858 INCHES SECOND END | | END NOMINAL DIAMETER | 0.788 INCHES FIRST END | | 0.788 INCHES SECOND END | | FIRST STEP NOMINAL LENGTH | 0.040 INCHES FIRST END | | 0.040 INCHES SECOND END | | FIRST STEP NOMINAL DIAMETER | 1.062 INCHES FIRST END | | 1.062 INCHES SECOND END | | BODY STYLE | WEBBED, SOLID | | SPECIAL FEATURES | COUNTERBORE FIRST END,0.6870 IN.DIA,0.1820 IN.DEPTH |
|
|