| BODY STYLE | WEBBED, OFFSET, SOLID |
| BORE NOMINAL DIAMETER | 0.354 INCHES BOTH ENDS |
| BORE STYLE | W/COUNTERBORE COUNTERBORE FIRST END |
| COUNTERBORE NOMINAL DIAMETER | 0.365 INCHES COUNTERBORE FIRST END |
| COUNTERBORE NOMINAL DEPTH | 0.313 INCHES COUNTERBORE FIRST END |
| END NOMINAL DIAMETER | 0.625 INCHES FIRST END |
| END NOMINAL LENGTH | 0.359 INCHES FIRST END |
| FACE TYPE | CONCAVE |
| FACE NOMINAL WIDTH | 0.359 INCHES |
| FIRST STEP NOMINAL DIAMETER | 1.250 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.031 INCHES FIRST END |
| HELIX ANGLE | 3.4665 DEGREES |
| HUB NOMINAL DIAMETER | 1.250 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI B1113/SAE 1113 FED STD 1ST MATERIAL RESPONSE HUB |
| MATERIAL | PLASTIC PHENOLIC BODY |
| MATERIAL | PLASTIC PHENOLIC TEETH |
| MATERIAL | STEEL COMP 1213 AND PLASTIC PHENOLIC HUB |
| PITCH DIAMETER | 2.0360 INCHES NOMINAL |
| MATING THREAD LEAD QUANTITY | 2 |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.070 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.391 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.143 INCHES |
| PRESSURE ANGLE | 14.5000 DEGREES |
| SPECIAL FEATURES | FIRST END HUB INCLUDES TWO DRIVE SLOTS,0.100 IN. W BY 0.281 IN. DEEP |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 57 |
| THROAT NOMINAL RADIUS | 0.308 INCHES |
| TOOTH DIRECTION | LEFT |