|
|
|
National Stock Number:
3020-00-918-3794
Federal Supply Class:
3020
National Item Identification Number:
009183794
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 537-1001-036 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 537-1001-036 | 2A994 | ALLIED SCARSDALE GEAR CORP |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | TEETH QUANTITY | 125 | | TOOTH FORM | STANDARD | | PRESSURE ANGLE | 20.0000 DEGREES | | PRECISION CLASSIFICATION | QUALITY NUMBER 12 | | STYLE DESIGNATOR | PROTRUDING HUB | | PITCH DIAMETER | 1.0417 INCHES NOMINAL | | NOMINAL OUTSIDE DIAMETER | 1.058 INCHES | | FACE NOMINAL WIDTH | 0.057 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.255 INCHES FIRST END | | BORE STYLE | PLAIN BOTH ENDS | | BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | HUB NOMINAL DIAMETER | 0.248 INCHES FIRST END | | CLAMPING SURFACE NOMINAL LENGTH | 0.189 INCHES FIRST END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 2A994 | | DESIGN CONTROL REFERENCE | 537-1001-036 |
|
|