| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.120 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| END NOMINAL DIAMETER | 0.218 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.062 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.625 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.119 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| PITCH DIAMETER | 0.9500 INCHES NOMINAL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.244 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.975 INCHES |
| NOMINAL OVERALL LENGTH | 0.306 INCHES |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SECOND STEP NOMINAL LENGTH | 0.125 INCHES FIRST END |
| STYLE DESIGNATOR | PROTRUDING HUB |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| TEETH QUANTITY | 76 |
| SPECIAL FEATURES | W/0.032 IN. DIA HOLE,0.093 IN. DEEP,COUNTERSUNK 90 DEG TO 0.062 IN. DIA.,LOCATED 0.215 IN. FROM CENTER OF BORE,W/O.500 IN. DIA. BY 0.030 IN. LG UNDERCUT IN STEP AT RIGHT ANGLE TO BORE |
| TOOTH FORM | STANDARD |