| MATERIAL | STEEL COMP 416 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | OXIDE OVERALL |
| TEETH QUANTITY | 27 |
| TOOTH FORM | STUB |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB, RECESSED BODY |
| PITCH DIAMETER | 0.4220 INCHES NOMINAL |
| NOMINAL OUTSIDE DIAMETER | 0.451 INCHES |
| FACE NOMINAL WIDTH | 0.047 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.155 INCHES FIRST END |
| BODY RECESS NOMINAL DEPTH | 0.031 INCHES SECOND END |
| BORE STYLE | W/COUNTERBORE COUNTER BORE, SECOND END |
| BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| COUNTERBORE NOMINAL DEPTH | 0.031 INCHES COUNTER BORE, SECOND END |
| COUNTERBORE NOMINAL DIAMETER | 0.328 INCHES COUNTER BORE, SECOND END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| HUB NOMINAL DIAMETER | 0.367 INCHES FIRST END |
| BODY STYLE | WEBBED, OFFSET, SOLID |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| SPECIAL FEATURES | ONE 0.020 IN. DIA. HOLE ON FACE OF GEAR 0.148 IN. FROM CTR OF HOLE TO CTR OF BORE |