|
|
|
National Stock Number:
3020-00-943-5149
Federal Supply Class:
3020
National Item Identification Number:
009435149
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 538750 | 28596 | ARROW GEAR LLC | | 538750 | 77445 | RTX CORPORATION | | 538750 | 95208 | PARKER-HANNIFIN CORPORATION DIV CYLINDER DIVISION |
|
Techincal Specification:
| BODY STYLE | WEBBED, OFFSET, WITH LIGHTENING HOLES | | BORE STYLE | SERRATED BOTH ENDS | | END NOMINAL DIAMETER | 0.589 INCHES SECOND END | | END NOMINAL DIAMETER | 0.669 INCHES FIRST END | | END NOMINAL LENGTH | 0.313 INCHES SECOND END | | END NOMINAL LENGTH | 0.375 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.250 INCHES | | FIRST STEP NOMINAL DIAMETER | 0.750 INCHES SECOND END | | FIRST STEP NOMINAL DIAMETER | 0.820 INCHES FIRST END | | FIRST STEP NOMINAL LENGTH | 0.023 INCHES SECOND END | | FIRST STEP NOMINAL LENGTH | 0.031 INCHES FIRST END | | HUB STYLE DESIGNATOR | 1 STEP BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E9310 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.335 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.406 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.3150 INCHES | | NOMINAL OVERALL LENGTH | 1.040 INCHES | | SPECIAL FEATURES | 1ST END COUNTERBORED,0.575 IN. DIA BY 0.125 IN. DP;2ND END 0.415 IN. DIA W/2 DRIVE SLOTS | | PITCH DIAMETER | 2.1526 INCHES NOMINAL | | PITCH ANGLE | 11.9103 DEGREES | | PRESSURE ANGLE | 22.5000 DEGREES | | SERRATION PITCH DIAMETER | 0.5000 INCHES NOMINAL BOTH ENDS | | SERRATION QUANTITY | 20 BOTH ENDS | | STYLE DESIGNATOR | SIDE FACE, PROTRUDING HUBS | | TEETH QUANTITY | 22 | | TEETH TYPE | STRAIGHT |
|
|