| DISTANCE FROM HUB END TO FLANGE END | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM BOTH ENDS |
| BORE DIAMETER | 0.3145 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM |
| BORE LENGTH | 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| BORE TYPE | STRAIGHT |
| DESIGN FORM | PLAIN |
| FURNISHED ITEMS AND QUANTITY | SETSCREW 1 |
| FACE WIDTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| HARDNESS RATING TEST METHOD | NOT RATED |
| HOLE LOCATION | LOCATED ON HUB |
| HUB OUTSIDE DIAMETER | 0.445 INCHES MINIMUM AND 0.505 INCHES MAXIMUM BOTH ENDS |
| OUTSIDE DIAMETER | 0.664 INCHES MINIMUM AND 0.668 INCHES MAXIMUM |
| OVERALL LENGTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720, COMP 303S MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-7720, COMP 303SE MIL SPEC 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE |
| PITCH DIAMETER | 0.614 INCHES MINIMUM AND 0.616 INCHES MAXIMUM |
| PROTRUDING HUB CHARACTERISTIC | PLAIN |
| SECURING HOLE QUANTITY | 1 |
| SECURING LOCATION | AA END |
| SECURING METHOD | THREADED HOLE |
| STYLE DESIGNATOR | PLAIN |
| SURFACE TREATMENT | PASSIVATE |
| TEETH QUANTITY PER ROW | 13 |
| TEETH ROW QUANTITY | 1 |
| THREAD SIZE | 0.138-32 |
| TOOTH PITCH | 0.1475 INCHES NOMINAL |