| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.500 INCHES BOTH ENDS |
| BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| END NOMINAL DIAMETER | 0.590 INCHES SECOND END |
| END NOMINAL DIAMETER | 0.812 INCHES FIRST END |
| END NOMINAL LENGTH | 0.347 INCHES SECOND END |
| END NOMINAL LENGTH | 0.672 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.313 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.690 INCHES SECOND END |
| FIRST STEP NOMINAL DIAMETER | 0.984 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.136 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.438 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| HUB STYLE DESIGNATOR | 3 STEPS FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4340 OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.483 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.235 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.040 INCHES |
| SPECIAL FEATURES | 0.800 IN. LG OF SPLINES IN BORE |
| PITCH DIAMETER | 0.9583 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SECOND STEP NOMINAL DIAMETER | 1.140 INCHES FIRST END |
| SECOND STEP NOMINAL LENGTH | 0.065 INCHES FIRST END |
| SPLINE PITCH DIAMETER | 0.4591 INCHES NOMINAL BOTH ENDS |
| SPLINE QUANTITY | 1 BOTH ENDS |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 23 |
| THIRD STEP NOMINAL DIAMETER | 0.690 INCHES FIRST END |
| THIRD STEP NOMINAL LENGTH | 0.065 INCHES FIRST END |
| TOOTH FORM | STANDARD |