| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.375 INCHES BOTH ENDS |
| BORE STYLE | W/COUNTERBORE BOTH ENDS |
| COUNTERBORE NOMINAL DEPTH | 0.031 INCHES COUNTERBORE FIRST END |
| COUNTERBORE NOMINAL DEPTH | 0.440 INCHES COUNTER BORE SECOND END |
| COUNTERBORE NOMINAL DIAMETER | 0.391 INCHES COUNTER BORE SECOND END |
| COUNTERBORE NOMINAL DIAMETER | 0.530 INCHES COUNTERBORE FIRST END |
| END NOMINAL DIAMETER | 0.591 INCHES SECOND END |
| END NOMINAL LENGTH | 0.435 INCHES SECOND END |
| FACE NOMINAL WIDTH | 0.250 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.750 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.080 INCHES SECOND END |
| HARDNESS RATING | 73.0 ROCKWELL C MINIMUM AND 78.0 ROCKWELL C MAXIMUM TEETH |
| HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE AND AISI/SAE1141 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 1141 OVERALL |
| PITCH ANGLE | 45.0000 DEGREES |
| PITCH DIAMETER | 1.0000 INCHES NOMINAL |
| PRESSURE ANGLE | 14.5000 DEGREES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.515 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 1.088 INCHES |
| NOMINAL OVERALL LENGTH | 0.920 INCHES |
| SPECIAL FEATURES | 0.560 IN.DIA,0.080 IN. W GROOVE,0.355 IN.FROM END OF HUB; END ITEM IS DETROIT DIESEL ENGINE,GENERAL MOTORS CORP,SERIES 71 |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| TEETH QUANTITY | 16 |
| TEETH TYPE | STRAIGHT |