|
|
|
National Stock Number:
3020-01-006-0663
Federal Supply Class:
3020
National Item Identification Number:
010060663
Description:
GEAR,HELICAL
Detail:
A GEAR, CYLINDRICAL IN FORM, WITH TEETH ON THE OUTER SURFACE AT AN ANGLE TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, HELICAL:
|
Manufacturer Information:
| 1776486 | 12603 | CLARK EQUIPMENT CO | | 1776486 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC | | Y112H00317 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | Y112H317 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | Y112H00317 | 9K760 | ENGINE CENTER INC DIV ENGINE CENTER |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE NOMINAL DIAMETER | 0.875 INCHES BOTH ENDS | | BORE STYLE | W/ KEYWAY BOTH ENDS | | FACE NOMINAL WIDTH | 0.750 INCHES | | HARDNESS RATING | 269.0 BRINELL STANDARD MINIMUM AND 302.0 BRINELL STANDARD MAXIMUM OVERALL | | HELIX ANGLE | 37.0000 DEGREES | | HUB NOMINAL DIAMETER | 1.740 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS | | KEYWAY NOMINAL WIDTH | 0.250 INCHES BOTH ENDS | | PITCH DIAMETER | 2.9660 INCHES MINIMUM AND 2.9680 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.563 INCHES BOTH ENDS | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.290 INCHES BOTH ENDS | | NOMINAL OUTSIDE DIAMETER | 3.159 INCHES | | PRESSURE ANGLE | 14.5000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUBS | | TEETH QUANTITY | 23 | | TEETH TYPE | SINGLE HELIX | | TOOTH FORM | STANDARD | | TOOTH DIRECTION | LEFT |
|
|