| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 1.000 INCHES BOTH ENDS |
| BORE STYLE | W/ KEYWAY BOTH ENDS |
| FACE NOMINAL WIDTH | 1.000 INCHES |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| HUB NOMINAL DIAMETER | 1.500 INCHES FIRST END |
| KEYWAY NOMINAL WIDTH | 0.251 INCHES BOTH ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286,CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | COPPER ALLOY OVERALL |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH FACE |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.190 INCHES TRANSVERSELY THROUGH FACE |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH FACE |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF TRANSVERSELY THROUGH FACE |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.625 INCHES FIRST END |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.560 INCHES BOTH ENDS |
| NOMINAL OUTSIDE DIAMETER | 2.100 INCHES |
| PITCH DIAMETER | 1.9000 INCHES NOMINAL |
| PRESSURE ANGLE | 14.5000 DEGREES |
| SPECIAL FEATURES | MTG HOLES SPACED 90 DEG APART,ONE HOLE LOCATED ON TOP OF KEYWAY |
| STYLE DESIGNATOR | PROTRUDING HUB |
| TEETH QUANTITY | 19 |
| TOOTH FORM | STANDARD |