| END NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| END NOMINAL LENGTH | 0.250 INCHES SECOND END |
| END NOMINAL LENGTH | 0.688 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.750 INCHES |
| FACE TYPE | STRAIGHT |
| FIRST STEP NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| FIRST STEP NOMINAL LENGTH | 0.250 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.375 INCHES FIRST END |
| HELIX ANGLE | 1.7831 DEGREES |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HUB STYLE DESIGNATOR | 1 STEP BOTH ENDS |
| III MATERIAL | STEEL COMP 303 OVERALL |
| PITCH DIAMETER | 0.4990 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PRESSURE ANGLE | 14.5000 DEGREES |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.500 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.062 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.531 INCHES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD FORM DIRECTION | RIGHT-HAND |
| THREAD FORM QUANTITY | 1 |