| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | WEBBED, OFFSET, WITH LIGHTENING HOLES |
| BORE NOMINAL DIAMETER | 1.095 INCHES BOTH ENDS |
| COUNTERBORE NOMINAL DEPTH | 0.887 INCHES FIRST END |
| COUNTERBORE NOMINAL DIAMETER | 1.130 INCHES FIRST END |
| END NOMINAL DIAMETER | 1.377 INCHES FIRST END |
| END NOMINAL DIAMETER | 1.377 INCHES SECOND END |
| END NOMINAL LENGTH | 0.431 INCHES FIRST END |
| END NOMINAL LENGTH | 0.570 INCHES SECOND END |
| FACE NOMINAL WIDTH | 0.510 INCHES |
| FIRST STEP NOMINAL DIAMETER | 1.580 INCHES FIRST END |
| FIRST STEP NOMINAL DIAMETER | 1.535 INCHES SECOND END |
| HUB STYLE DESIGNATOR | 1 STEP BOTH ENDS |
| MOUNTING HOLE NOMINAL DIAMETER | 0.186 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 3 PLAIN AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 9 PLAIN AND 3 THREADED AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.250 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 28 AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.735 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.950 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 3.795 INCHES |
| NOMINAL OVERALL LENGTH | 2.200 INCHES |
| PITCH DIAMETER | 3.6000 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SECOND STEP NOMINAL DIAMETER | 1.662 INCHES FIRST END |
| SECOND STEP NOMINAL LENGTH | 0.290 INCHES FIRST END |
| SPLINE QUANTITY | 20 BOTH ENDS |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| TEETH QUANTITY | 36 |
| TOOTH FORM | STANDARD |