|
|
|
National Stock Number:
3020-01-127-6221
Federal Supply Class:
3020
National Item Identification Number:
011276221
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| 195015 | 10110 | SCIENTIFIC ATLANTA INC |
|
Techincal Specification:
| ATTACHMENT METHOD | MOUNTING HOLE | | BOLT HOLE CIRCLE NOMINAL DIAMETER | 0.500 INCHES AXIALLY THROUGH BODY, FIRST END | | BORE NOMINAL DIAMETER | 0.2407 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | CLAMPING SURFACE NOMINAL LENGTH | 0.317 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.120 INCHES | | HUB STYLE DESIGNATOR | SPLIT FIRST END | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MOUNTING HOLE NOMINAL DIAMETER | 0.062 INCHES AXIALLY THROUGH BODY, FIRST END | | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH BODY, FIRST END | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.317 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 2.8440 INCHES | | PITCH DIAMETER | 2.8125 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | TEETH QUANTITY | 180 | | TOOTH FORM | STANDARD |
|
|